2/13/09

Fitting the Nose Cone Part 1

13th Feb 2009

I used the test piece to hold the nose in place for fitting, I set the angle from the design in Cad i added to the boat drawings and lined up the bevel to copy it .



Nose piece can slide in and out as I cut out the fitting shape.


Anchor swivel head will live in the nose.


Sides cut away and nose piece shaped to get the first welds


Upward view



14-2-2009 setting the top cut to flow with the top of the bulwark.
It was really a case of what looked best.



No comments: